.275 6.99 of a sht 1 10 awg, 30 amp rev c sd01362 right angle solder mount powersnap, angles: 2 scale: 8:1 w ronics t lec wallingford, connecticut 06492 cwb 62 barnes industrial road north 04/11/08 cwb date appd by er7306 description c rev 10/15/03 jed date approved 10/15/03 sd date approved 10/15/03 cwb date approved 10/15/03 jem date drawn revised per drawing customer winchester electronics corporation e er t inches per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .xxxx 1 .271 6.88 scale: 4:1 catalog p/n: 01362 recommended cable trim dimensions notes: unless otherwise specified 1. for general series specifications, see sd74-0000. 2. material specifications: brass (b05) per uns53800 3. finish specifications: body: .000030 min gold per astm b488 over .000050 min nickel per ams-qq-n-290 4. electric al specifications: current rating: 30 amps 5. for use with 10 ga. or equivalent wire. 6. refer to cap10-01 for cable assembly procedure. .218 5.54 across flats .144 .08 3.66 pin 3.71 .186 accepts 4.72 .146 .003 .356 9.04
|
